How to install Dude?

Fadıl

You can check the Mikrotik Dude installation in our Mikrotik device.
If installed, the following dude package should appear in the command output.

[/php]
[admin@techsoftcenter-DUDE] >/system package print

Flags: X – disabled

NAME VERSION SCHEDULED

0 dude 6.44.3
1 routeros-arm 6.44.3
2 system 6.44.3
3 X ipv6 6.44.3
4 wireless 6.44.3
5 hotspot 6.44.3
6 dhcp 6.44.3
7 mpls 6.44.3
8 routing 6.44.3
9 ppp 6.44.3
10 security 6.44.3
11 advanced-tools 6.44.3 [/php]

How to File Operations with Group Policy Object (GPO)

How to File Operations with Group Policy Object (GPO)

Hi, In this article, I’ll talk about how to make some file operations using GPOs on our client computers in the Active Directory environment.

From time to time, client computers may need to copy, copy, delete an existing file, replace an existing file with a new one. It is also possible to find various batch files, but with GPO more practically.

Let’s start.

By creating a new GPO or editing one of the existing GPOs, let’s go to the Files under User Configuration or Computer Configuration section.

Switching: Trunks and Dynamic Trunking Protocol (DTP)

Fadıl

What is a Trunk?

We’ve seen in the previous article that a VLAN is a broadcast domain, a collection of ports or users that we wish to group together within an IP subnet, IPX network. We’ve also seen that VLAN’s work to control broadcast, multicast, unknown destination, and problem frame flooding. Our previous discussion centered on the concept of what a VLAN is, perhaps from the perspective of a single switch.

How to Filter MAC Address in DHCP Traffic with Wireshark?

Fadıl

If any computer on the Windows DHCP server has a problem getting a rope, you may want to open and examine the Wireshark. However, depending on the size of your network, there will be a large number of packets in the DHCP server, and it will be difficult to monitor only the packets from the computer that are experiencing the problem. In such a case, you can filter only the packets from the corresponding MAC address using the filter shown below.

Virtual Access Point Mikrotik

Fadıl

Virtual Access Point (VAP) on Mikrotik is a virtual interface that can be used to create multiple Access Point from one physical Wireless interface. So with just one physical Wireless interface alone, we can create multiple Access Point with SSID, IP address, and MAC Address different each AP.

Virtual Access Point on Mikrotik can also use DHCP Server on each VAP. In addition, we can also set the firewall on this VAP interface. The feature is the same as in Virtual LAN (VLAN) on a wired network.