Firewalld is used in the following Linux distributions as the default firewall management tool:
The most distinctive feature of Firewalld compared to IPTables is that it uses zones. Zone rules apply. Each zone can use different configurations. You can change all the rules that you apply by changing these zones.
Firewall-cmd is the most basic command we will use.
On our Nginx server, for some reason, we may want to encrypt a directory/folder so that it can only be accessed with our username and password. Since Vesta CP is a free web panel, we will explain this article on how to encrypt a site’s directory on VestaCP on NGINX.
You can perform Nginx directory encryption in all Nginx installed VPS or VDS server packages in this article.
We connect to the SSH of our Linux server and run the following command;
Shared Bandwidth Management Mikrotik used to allocate the bandwidth of each client with a rate that varies depending on active or other clients in the network. By using this method then if one client is inactive (offline) then its bandwidth allocation will be given to another client.
Continuing the previous scenario of Simple Bandwidth Management Mikrotik, we suppose there are two client Eg client 1 and client 2 will each receive bandwidth allocation 256kbps / 256kbps. So the total bandwidth proxy for the second client is 512kbps / 512kbps. If the client does not use allocation bandwidth completely, then the bandwidth allocation will be given to another client, so the client 2 will get a maximum bandwidth allocation.
Simple Bandwidth Management Mikrotik used to allocate bandwidth Mikrotik simple (simple) using Mikrotik Simple Queue menu. By using static bandwidth allocation control the bandwidth proxy for each client will continue. For instance, client 1 will get the bandwidth allocation is equal to 256kbps / 256kbps, as well as client2.
Commands that can be used are as follows:
simple queue add name = limit-1 targets-addresses = 10.10.10.10 max-limit = 256000/256000
simple queue add name = limit-2 targets-addresses = 10.10.10.20 max-limit = 256000/256000
Or you can also use Winbox, go to the menu Queues -> Simple Queues
Bandwidth divides Internet is simply based interface using Mikrotik. This time we will discuss in this article. Before I proceed, I suggest reading the previous article on How to Limit (Limit) Bandwidth Mikrotik Mikrotik with Simple Queue.
Okay, we just started. So this time we will make the distribution of bandwidth is simply based on the interface used. For more details, please see the following network topology:
Internet bandwidth I use is as follows: