Explanation of the Use of Wireless Tools Mikrotik – Mikrotik Router has the function and features of Wireless that we can use for communication between devices with Mikrotik using wireless communication media. But not all Mikrotik can use this Wireless feature because of not all types of Mikrotik Wireless Card there.

Here is Mikrotik RB 750 which only have 5 ethernet interface and without the wireless interface, because there is no wireless card. Especially for Outdoor Mikrotik, most can use the Wireless feature because of available Mini PCI slot for the wireless card.

Login

There are many types of DNS records. It may be difficult for beginners to determine which DNS record is required or how it is set up. In this article, you will learn how to check the PTR record and whether it is set for an IP address.

What is PTR recording?

In short, the PTR record is like an inverted version of the A record. A record maps the domain name to an IP address. PTR maps the IP address to a hostname. However, these two records are independent. For example, a record of hostinger.com may point to the IP address 21.21.128.xx, while 23.23.128.xx can be mapped to a completely different hostname.

Good afternoon on this article I will discuss setting point to multipoint before my friends already know the difference between point to point with the point to multipoint, let me repeat again point to point means one point to point opponent while pointing to multipoint ie one point to many points that can be connected.

PTMP inspection

point to multipoint understanding by Wikipedia is communication made through different types from one to multiple connections, Point-to-multipoint is the most widely used in the wireless Internet (Wireless) and IP telephony through radio frequency. Point-to-Multipoint is also often abbreviated as P2MP, PTMP or PMP.

The Linux tar command is one of the most commonly used Linux commands for compression. There are many benefits of using the tar command and are therefore highly appreciated by professionals. In this guide, we will teach you everything you need to know.

Tar stands for Tape archive and is used to compress one or more files and folders.

In most cases, a .tar file is created after compression with the tar command. Further compression is done using gzip, resulting in a .tar.gz file.

I will share a tutorial on how to connect the Router a million people that is Mikrotik with the access point from Cisco Vendor named Aironet

okay we will just explain a little bit about Access Point ( AP ) Aironet from Cisco

Introduction with Cisco Access-Point Aironet
In Cisco Aironet there are 2 modes for operational:

1. Lightweight Access Point ( LAP ), in LAP for operational use Controller for centralized AP management, called WLC
2. Autonomous Access Point ( AAP) or sometimes called “Standalone” ^ _ ^, in the AAP, is not required Controller, so each AP has their own management