When installing a Windows server on oVirt, Inter-Network Interfaces ”,“e1000”and” Disks come as “IDE”. Otherwise, your server will not turn on. This also affects the performance of the machine. Therefore, you should do ”Network Interfaces”, “VirtIO” and “Disks”, “VirtIO-SCSI… Thus, your machine will operate at a smooth performance.

In order to do this configuration, you must install oVirt Guest Agent Driver (oVirt-toolsSetup) after installing the Windows server. You must first download the corresponding version of oVirt-tools-setup.iso (https://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/), mount it as a CD Drive, and then perform the typical * .exe installation… After the installation is finished,

Limiting / Limit Bandwidth on Mikrotik Hotspot is very necessary. Considering Wireless Hotspot can be accessed by anyone who has access rights, so in order to promote justice and prosperity prevalent in all the hotspot user is required Hotspot Mikrotik Bandwidth Limitations.

Bandwidth Limitation Methods Mikrotik Hotspot :

– The built-in limiter is Hotspot Mikrotik Bandwidth Limit method which uses rate-limit parameters in server-profile for limit total traffic on the network hotspot whereas if you want to limit per user can use the rate-limit on user-profile. Built-in Limitation did automatically and easily but do not permit the implementation of HTB.

What will you need?

Before you begin this guide, you need the following:

• Terminal access

Step 1 – Access the remote server

It is recommended that you use a newly installed free virtual server to prevent you from accidentally performing an incorrect operation.

SSH, Secure Shell means. A protocol used to connect to a remote server/system.

Here is the simple command you should use:

ssh user @ ServerIP

This command  connects you to a server with an sunucuip The IP address and useruser name. Another and simpler way to connect ssh serveripwould be to use it. With this method, the shell will think that you are trying to connect with the same user you are currently logged in to. 

Tutorial How to Share Wireless Connection in Mikrotik Which Have Only 1 Wireless Interface

At some point, you want to share your internet connection from the wireless interface on your Router Mikrotik Routerboard while your routerboard has only 1 wireless interface. Where your wireless interface is used as a receiver Internet connection (Station) that does not allow you to spread the internet connection through this wireless interface as well. At times like this, you can take advantage of the so-called Vitice Access Point Mikrotik interface (VAP). With this VAP interface, you can add a wireless interface to the master interface that is wlan 1. The later VAP interface is what will spread the internet connection via Wireless as well. Below is a tutorial on how to set …

VPN stands for  Virtual Private Network. An open-source VPN software is OpenVPN and can run as a Linux VPN server. Simply, a VPN secures connections by creating a point-to-point secure connection. Using a good VPN for Linux is one of the best ways to stay secure on the Internet or an open network. In this article, we will show you how to set up your own Linux VPN server using OpenVPN. Turn your VPS into a great security measure!