Proxy as an Access Point can be used in the implementation of the Access Point for WiFi Hotspot or for regular. Access Point here means Mikrotik function is only used as an Access Point Wifi, without a process of routing and NAT in the proxy.

Well, this time I will be demonstrated using Mikrotik as an Access Point on the network Mikrotik Hotspot. Please see Figure Topology Hotspot Mikrotik following:

The minimum system requirements before starting Windows 10 Setup are listed below.

1. Processor (CPU) = PAE, NX or SSE2 supported processor running at 1GHz and above
2. Memory (RAM) = 1GB (for 32-bit) or 2GB (for 64-bit)
3. Graphics Cards = All graphics cards that support DirectX 9 and have WDDM drives
4. Hard Disk (HDD) = 16GB (for 32-bit) or 20GB (for 64-bit)

After running the installation DVD, USB, disc or iso mount file, we drop to the bottom screen. Here, after selecting the language, date, time and keyboard settings, we proceed with Next.

3 Layered Wireless Mikrotik Security System

Security (security) is crucial and must be considered when we build a network, especially wireless networks. Because wireless networks can be seen, known, and is accessible to anyone. So should we implement certain security systems on this wireless network.

There are at least three security systems that we can apply to the network Wireless Mikrotik, and all three can be applied simultaneously so that the level of security will be guaranteed. Here are 3 Layered Security System Wireless Mikrotik :

On systems (depending on the project and environment), we often work with local IP's, and we can obtain them from the network settings or through the command line. However, to process real IP's, we can obtain real IP via the router/modem interface or the URL that provides online services (multiple sites are available) and then process. Above is the NCC ripe.net as an example. There is a section above the entrance on the right side that reflects your output rope.

In their spare time, we will continue with the previous post that BuildsTunnel with Mikrotik IPIP at this time we will make a Tunnel with EoIP. Ethernet over IP (EoIP)

Ethernet over Internet Protocol (EoIP), is a protocol in RouterOS that serves to build a  Network Tunnel between MikroTik routers over a TCP / IP connection. EoIP is MikroTik proprietary protocols, to use this feature on the router and the router at the Head Office Branch Office should be the same – the same use MikroTik router. Protocol encapsulation EoIP using Generic Routing Encapsulation (GRE). Data Available at: ( RFC1701 ).