I will talk about two ways to do this. The first method is how we can do this from the MySQL official page. Once the image is linked to the page, click the Download tab.

Then click the Windows tab.

After clicking the MySQL installer tab on the page that opens,

Here you can download and install from the links at the bottom of the page. The first link is the internet installation package if you have an internet connection, the second link is the local installation file that contains the entire recommended installation package for users who do not have an internet connection. The page is also available in the installation guide (MySQL Installer Documentation). But there is a situation,

To perform remote process Mikrotik routers from the Internet using their own Domain that must be prepared are:
– OS Mikrotik Version 6.14 and above, because the version under 6.14 there is no feature of IP Cloud.
– Domain and Hosting for sure

For the topology is like “below”,

#Note:
– Mikrotik must connect directly to the Internet “using IP Public Static / Dynamic”

Steps were taken on Mikrotik GW
– I assume that RB Mikrotik has connected to the Internet.
– Enabling IP Cloud or often called DDNS by Network Engineer practitioners

There are three important things to do before any roles or features are installed on the server.

The first priority is the Computer name. If you did not specify the name of the machine in Microsoft Windows system setups as you can see from the screenshot below by default by specifying a name comes.

Of course, it would be a good move to replace it with a more logical name that is easy and memorable. I set the following name for my test server.

How to Create a Mikrotik Hotspot without Connect Directly to AP Using EoIP Tunnel

How do I create a WiFi Hotspot Mikrotik where the Access Point (AP) it is not connected directly to its Mikrotik Hotspot Server? The question that comes to mind when trying to implement a WiFi Hotspot Mikrotik system where its AP scattered everywhere, with different locations (different buildings and different room). Besides the more difficult is all AP nobody is directly connected to his eth Mikrotik used as Hotspot Server.

You may sometimes want to change your computer’s DNS settings and use different DNS. For example, you may want to use Google DNS.

Right-click on the right and bottom computer mark, and then click Open Network and Sharing Center.

Click once on the interface (NIC) that connects you with the outside world.

Click the Properties tab on the screen that appears as follows.

With the IPv4 selected, click the Properties tab again.