If you are using VirtualBox, up to version 4.3 there is no option to auto start VM VirtualBox, or run VM VirtualBox automatically when PC starts up as it does with VMWare. But do not worry, because this can still be tricked by using some tricks.

Auto start feature is very useful when we will create and use Proxy Server, etc. using Mikrotik on PC itself, or do other things. Well, for the autostart feature VirtualBox can we use, there are some tricks that we must run. The easiest and simplest trick is to create a VM shortcut that will run and run it automatically when PC startup.

Simple Network Management Protocol(SNMP) is used to control devices located in large network structures. From the temperature on the device to the users connected to the device, internet connection speed, and system uptime, various information is contained within the panel structure defined in SNMP.

You can review this link before installing.

Run the following command to start the installation. Let’s install SNMP and its tools.

>yum -y install net-snmp net-snmp-utils

You can then use the vi editor to configure SNMP with the following command.

Tutorial How to Use USB Smartfren Modem in Mikrotik RB751U-2HnD – Actually in previous articles have been discussed about Tutorial Share Internet Connection Modem USB with Mikrotik with Sierra modem and GSM card 3. Well, this time we will discuss the same thing using Modem Huawei and Smartfren card. Before we start, you should read this tutorial Share Internet Connection Modem USB with Mikrotik.

Okay, we started learning Mikrotik to connect smartfren modem with Mikrotik RB751U-2HnD. Previously check whether your Smartfren Modem is already supported and recognized by Mikrotik.

First, let’s list the interfaces and see detailed information about their status. For this;

Run the nmcli d command.

I have 1 interface’  eno and it seems that it is not connected, as the picture below shows,

Then let’s start the process quickly. First, you need to use an editor command for interface settings. I’ll use the vi command in the default, my advice is vi, but you can use different editor commands. Of course, you can use those commands after installing and integrating them.

Upgrading Mikrotik to the latest version of RouterOS is quite important because by upgrading the Mikrotik, there are many benefits that we will receive. In the latest version of RouterOS, there are some fixes and sometimes there are additional features that do not exist in earlier ROS versions.

To be able to upgrade the RouterOS version to the latest version on your Mikrotik, please read the previous Mikrotik Tutorial:
How to Upgrade / Update Mikrotik RouterOS via Winbox