UBNT NETWORKS

In this article, we will examine the Unifi Adoption Failed Problem which is a common problem.

I will talk about the access points that are not adapted to the unifi controller (Unifi Adoption Failed Problem) in Ubnt unifi access points that we frequently encounter in corporate networks.

Normally the Ubnt Unifi access point and controller should be automatically adapted if they are on the same network, but in some cases, it doesn’t adapt if you’re on the same network, even though options such as antivirus and firewall are turned off. (I’m still not able to solve some of the reasons that we are able to make Unshift ssh saves us from this situation.) With ssh, we can perform manual adaptation.

To create a simple Access Point (Auto WDS), follow these steps.

Note: NFT series devices require an external DHCP server as they operate in bridge mode by default.

Step 1 – Access Point WDS configuration;

If the device is not connected to a DHCP source, the default IP address is varsayılan “192.168.2.66”.

However, if it is running on a DHCP server, find out which IP address your device receives from your DHCP source and enter the interface settings.

By creating dynamic address lists for each relevant port and protocol; SSH, Telnet and Winbox ports to come with the Brute Force attacks on the Internet or local network will prevent future port scans.

In our code structure, Brute Force attacks are prevented by going through four different Stages with one Jump, rule, Level1, Level2, Level3 Tracking list step, and Black List rule, which controls the frequency of connection requests, for each of the SSH, telnet and Winbox rules separately.

Ubiquiti Networks’ recent updates for devices on the UniFi platform and the minimum firmware requirements supported by UniFi Controller software (firmware) requirements are not compatible with the firmware version installed on newly purchased devices. and configuration operations cannot be performed directly. In this article, we will talk about the manual update of the Wireless Access Points on the UniFi platform.

Software for Windows Platform;

• SSH Client: Putty, KiTTY, etc. program,
• Any program that supports WinSCP  or SCP connection protocol,
• Firmware compatible with your UniFi AP can be downloaded here.

What is DNS? What is NS?

I would like to refer many questions like this to related articles and make a direct transition to this topic.

Note: The domain to be used in the article is fatlan.com, ips are not real.

In Linux systems, you need to install the DNS system and install the Bind package to activate it. The name of the service is known as Named. With Named you can provide service management.