Shared Bandwidth Management Mikrotik used to allocate the bandwidth of each client with a rate that varies depending on active or other clients in the network. By using this method then if one client is inactive (offline) then its bandwidth allocation will be given to another client.
Continuing the previous scenario of Simple Bandwidth Management Mikrotik, we suppose there are two client Eg client 1 and client 2 will each receive bandwidth allocation 256kbps / 256kbps. So the total bandwidth proxy for the second client is 512kbps / 512kbps. If the client does not use allocation bandwidth completely, then the bandwidth allocation will be given to another client, so the client 2 will get a maximum bandwidth allocation.
The configuration is first performed is configured to limit bandwidth usage for both the client as well.
This configuration also serves as a parent-bandwidth restriction. Commands that can be used are as follows:
queue simple add name = limit-all target = 10.10.10.0 / 24 max-limit = 512000/512000
Furthermore, the configuration is made to limit the bandwidth usage of each client by using the previous configuration as a parent. Commands that can be used are as follows:
queue simple add name=limit-1 target=10.10.10.1 max-limit=512000/512000 limit-
queue simple add name=limit-2 target=10.10.10.2 max-limit=512000/512000 limit-
Now we try to check by monitoring the client bandwidth allocation using the tool torch proxy.
1. When both the client actively use the entire bandwidth allocation (512kb)
2. When one client is inactive (offline), the bandwidth will be given to another client.
Thus Tutorial techsoftcenter.com on Shared Bandwidth Management Mikrotik Using Simple Queue. Please, you try and adjust itself to the conditions of the network used.