How to Setup Tp-Link Cpe610 Access Point

Connecting the TP-Link device to your computer

Connect the devices as shown in the figure below.

A.Connect the CPE’s LAN0 port to the PoE port of the PoE adapter.

B.Connect the computer to the LAN port of the PoE adapter.

C.Plug the PoE adapter into the power socket.

Power_Supply
Power_Supply

In order to connect to the Tp-Link Cpe610 device, we first need to give the IP address of our computer’s ether port as 192.168.0.10.

Windows operating systems Go to Network and Internet > Change adapter options. Select

Right-click Local Area Connection, select Properties, and then double-click Internet Protocol Version 4.

Select Use the Following IP address: and type in the IP address, Subnet Mask, and Default gateway as shown below. (The IP address should be 192.168.0.X. X ranges between 2 and 253, e.g. 192.168.0.10.)

Click OK to apply the settings.

Internet Portocol Version 4
Internet Portocol Version 4

 

For Mac OS:

Go to the Apple > System Preferences > Network.

For_Mac_Network
For_Mac_Network

Select Ethernet on the left, then select Manually from the drop-down list and input the IP Address (The IP address should be 192.168.0.X. X ranges between 2 and 253, e.g. 192.168.0.10.). Click Apply.

For_Mac_Ethernet
For_Mac_Ethernet

 Logging into the Management Page

Before logging into the management page, please check the following points:

A.Your computer and devices are connected correctly.

B.Your computer has a static IP address.

Note: It is recommended to use the latest version of Google Chrome, Firefox, IE or Safari.

Step 1

Open a Web Browser, type 192.168.0.254 in the address bar, and press Enter (Return for Mac Os) to load the login page.

Step 2

Enter admin for both User Name and Password, then select the Region and Language from the drop-down list. Read TERMS OF USE and check the box “I agree to these terms of use”, then click Login.

TP_Link_Login
TP_Link_Login

Step 3

Change the user name and password for security purposes. Click Finish to log into the web management page.

Change_Password
Change_Password

Now we will make the wireless AP settings from the quick setup section.

We make our settings as shown in the picture below.

After selecting the Access Point, we click next.

Again we click next.

We select antenna 23db in the wireless tab.
We can adjust the transmit power to the value we want, it will be more advantageous to set it to the highest.

Distance setting We can choose a value between 0 and 27.9 km or leave it automatically. But it would be more advantageous to choose a small value here.

I hope it has been a useful article.