How to configure UBNT GBE-LR – UBNT GigaBeam LR – 60GHz, airMAX AC 60 GHz / 5 GHz?

GigaBeam LR with a high gain satellite antenna is a 60 GHz radio designed for low noise and high-efficiency connection in urban environments with high signal intensity in long-range applications. It includes a 5 GHz radio that also provides redundancy for outages. They are indispensable devices for high traffic transmissions for their 2 Km to 12 Km models.

2.4GHz Internal wireless configuration broadcast and UNMS Application
In addition, in difficult installation areas, you can use the 2.4 GHz wireless configuration broadcast, which offers a connection up to 20 meters from the device internally to facilitate your maintenance during or after installation, thanks to this broadcast you can use your device or your device at any point on the local network where your device is included. Or you can use this publication to interfere with your device with the UBNT UNMS quick configuration software, which is offered free of charge on Android and IOS platforms.

ubnt mobile
ubnt mobile

Let’s look at how to set up our antennas. First, let’s look at the values of a link antenna connected to the dashboard.

Link Dashboard
Link Dashboard
Link Dashboard
Link Dashboard

Basic Wireless Settings Access Point Configure

Basic Wireless Settings Access Point Configre
Basic Wireless Settings Access Point Configure
Management Network Setting
Management Network Setting
Services Setting
Services Setting

Detailed settings related to the antenna can be accessed in the System section. This is where many settings are made such as updating the antenna, NTP service settings, giving the antenna name, changing the password, rebooting the device, resetting, backup, and restoring.

System
System

Basic Wireless Settings Station Configure

Basic Wireless Settings Station Configure
Basic Wireless Settings Station Configure

When the access point button for the station antenna is turned off, the receiver is switched to mode. When you scan the SDS section, we find and select the transmitter antenna.

Note: We activate Wireless Security for the security of data transmission. The same security WPA2 Preshared Key password must be used on both the transmitter and receiver sides.

Other settings for our station antenna are made in the same way as the access point antenna.

I hope it was a useful article.