Being patient is crucial when computer troubleshooting issues start creeping in the system. Getting frustrated or not taking notes can prolong the process of troubleshooting considerably. While starting, be careful about the things that might have changed. As the things, which have changed, might be the part of the fundamental issues so be attentive.
Before restarting the PC, be certain to note down any error notifications. Also, observe the programs running at that time. If the notification is in a windows box, clicking Details can suggest additional information.
Methods of troubleshooting
One of the most basic troubleshooting methods is to carry out a simple restart of the system. One should switch off windows totally until the PC is entirely turned off. Then one should wait for a few seconds or so and then one should switch the PC back on. If there is a printer connected to the PC, it is suggested that the switch these devices off at the same time that one should switch off the computer. In most cases, one would wish to switch on this machine again before one turn the PC back on.
One should also check whether there is an issue, which is causing the issue to repeat itself. As one, utilize the procedure of removal to locate the issue and verify to see that the issue still exist each step of the way. If the issue is expected and repeatable, it will make troubleshooting much smoother. Accidental issues are very hard to troubleshoot. One should pay heed to the actions of users and treatment outlines in troubleshooting problems. The most significant question is what changed before the issues exhibiting it.
Power supply issues
If the PC does not switch on, it possibly has a problem with the power supply. One should also check the outlet that the PC is plugged into by inserting a different machine into the same outlet. If it is on a power strip, one should also ensure any error has been reorganized. There is characteristically a switch or button to reset a power strip from a power condition. If the outlet tests out OK and one do not hear anything spinning inside the PC when you turn it on, the power supply has possibly gone bad. This part can be restored by an eligible technician.
When one starts the PC, it will carry out power on self-test. If there are any clear hardware problems, an error code will be shown and a sound of beep may come from the system speaker. The number/length of beeps and error codes will differ based on the exact issue. For example, an issue related to memory will often display a 201: Memory Error.
When the PC produces a series of beeps when the computer starts, that shows a hardware matter. The system is competent in spotting hardware issues and issuing the error sound. The outline and extent of beeping sound will differ by BIOS maker and hardware part.