Network

Blocking / Limiting connection Internet Download Manager (IDM) in Mikrotik can be done using the Layer7 protocol. If a user to download using IDM, then he can …

Load Balance / Load Balancing Mikrotik is a technique or method to divide the load into several paths (links) so that the use of the path (link) to be better. …

This article is a continuation of the article I wrote earlier on How to Hack / Hack Hotspot Login Mikrotik & Wifi.id on Linux. After successfully root/hack …

How to prevent a client from changing manual control eg 8.8.8.8? This question is in the previous article that is: Easy Way to Block Adult Sites with DNS in …

Introduction This month we continue looking at Quality of Service (QoS) in Cisco devices. This article looks at Traffic Shaping Policy Routing QoS Policy …

The moment you get into the hands of Mikrotik RouterOS is the default setting. Every time you boot is initialized and any supported hardware is immediately …

When you see an fcs error it is almost always the cabling on the radio at the other end of the link from where you see the FCS errors. You can change cables …

In this article, we’ll look at the following topics: IP Precedence bits Random Early Detection (RED) Committed Access Rate (CAR) Some Cisco QoS Links The IP …

Mikrotik Fetch Tool is one of the tools on the console/terminal Mikrotik RouterOS that works to copy (copy) files through FTP, HTTP, and https protocol. This …

What Is QoS? QoS stands for Quality of Service. The term is being used by Cisco to refer to IP-based features that allow specification and delivery of services …

If you are in the informatics sector, it is impossible for you to come to a point where the Mikrotik router does not come. There are two important points here. …

OSPF Network Type Please also read the previous article OSPF and Route Summarization– Part II OSPF has three network types: Broadcast networks (Ethernet, Token …