KVM Kernel-based virtual machine is a virtualization application developed for the Linux kernel that converts it to a higher system.
Before installation, login to our server to see if it supports CPU, let’s check the CPU information with the help of the following commands.
The output of this command means “CPU(s):” 0 does not support if it is 0, and if it is more than 1 or 1, it means it supports.
We will explain how to connect to your OpenVPN server via Ubuntu in two ways. One is via CLI and the other via GUI. We will use PfSense as the VPN server. In addition to using PfSense as an OpenSource firewall, you can use it for many purposes. We will use the VPN server for the process here and get the configuration files from it.
First, we extract the configuration files from the VPN server. **.Ovpn, \ .p12, * .key. In the meantime, the configuration varies on the server-side. So for ios, for android, for windows and are divided into standard packages.
When installing a Windows server on oVirt, Inter-Network Interfaces ”,“e1000”and” Disks come as “IDE”. Otherwise, your server will not turn on. This also affects the performance of the machine. Therefore, you should do ”Network Interfaces”, “VirtIO” and “Disks”, “VirtIO-SCSI… Thus, your machine will operate at a smooth performance.
In order to do this configuration, you must install oVirt Guest Agent Driver (oVirt-toolsSetup) after installing the Windows server. You must first download the corresponding version of oVirt-tools-setup.iso (https://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/), mount it as a CD Drive, and then perform the typical * .exe installation… After the installation is finished,
VPN stands for Virtual Private Network. An open-source VPN software is OpenVPN and can run as a Linux VPN server. Simply, a VPN secures connections by creating a point-to-point secure connection. Using a good VPN for Linux is one of the best ways to stay secure on the Internet or an open network. In this article, we will show you how to set up your own Linux VPN server using OpenVPN. Turn your VPS into a great security measure!
The Linux tar command is one of the most commonly used Linux commands for compression. There are many benefits of using the tar command and are therefore highly appreciated by professionals. In this guide, we will teach you everything you need to know.
Tar stands for Tape archive and is used to compress one or more files and folders.
In most cases, a .tar file is created after compression with the tar command. Further compression is done using gzip, resulting in a .tar.gz file.