Network

Telnet gibi güvenlik açığı olan bir protokol kullanmak yerine giriş bilgilerinizi ve verileri akışlarınızı şifreleyecek daha güvenli olan bir protokol olanSecure Shell (SSH) kullanabilirsiniz. Bu sizi ve verilerinizi daha güvende hisetmenizi sağlayacaktır.
Şimdi adım adım SSH nasıl kurulacağını göreceğiz:

1. Hostname settings are made:

Router(config)#hostname techsoftcenter

2. The domain name is set (here hostname and domain name are required to generate encrypted keys):

Todd(config)#ip domain-name techsoftcenter.com

3. Encrypted keys are generated to securely conduct the session:

In this article, Mikrotik devices and DHCP Server is the desire to make an IP based speed limit. We will now see how to do this together. For example, when the user requests an IP, the DHCP Server adds a rule about speed while giving IP. When DHCP lease time expires or is deleted from the lease list, our rule with speed limitation will also be disabled.

Of course, we need to pay attention to a subject here. If the user has given a manual IP address, that user is not subject to the speed limit. To avoid such a situation, you should write a rule that will affect your entire network.

What is Bridge Mod? Are there all modems in the bridge mod?

Generally, most modems have bridge mods. In simple modems, there is no bridge mod.

Modems are usually configured and shipped in router mode. Accordingly, it operates in router mode in many places. This means that the modem registers with your PPP information to the ISP (internet provider) side and takes your external IP address itself and gives a different subnet to the local network behind it. Or it does the opposite (NAT Technology).

In this article, we will see how to install new firmware on Enterasys switches whose system is damaged or not connected via the serial port.

Let’s say first, Enterasys was purchased by the Extreme Network. Therefore, technical support is now provided by Extreme Network.

Before starting the processes, we can download the required firmware software in the link below and make the necessary membership processes and download it from here.

In this article, we will see how other neighboring networks connected to MikroTik devices are discovered and how we can connect to the discovered devices.

For this, we will see other devices in the same network connected to our Router in the IP> Neighbors> Neighbors List section from the menu on the left side of my MikroTik the device that we are connected to.

Neighbor_List

Here we will see how to discover the devices connected to our Mikrotik Router.