Network

It has the same working logic as Doh DNS, that is, the Domain Name that a client device wants to go to is resolved and the request it sends turns into an IP address in the background, the difference of Doh is that it encrypts these requests.

If D.O.H is not used, even if a request is sent to a site using HTTPS, this request is kept as non-encrypted text in the background, and therefore D.N.S requests from client devices may be viewed by ISP or by an unauthorized person.

DES-3200 series Metro Ethernet ETTx is a member of the D-Link Layer 2 managed switch family designed for FTTx and corporate markets.
Let’s take a look at the main features of this switch and how to set the initial settings.

Flow Control for Safe Transfer

802.3x flow control reduces the number of packets in each port to the lowest level when the port’s buffer is full. This feature provides you with a more reliable connection for all connected devices.

What is a Switch?

It is a network connection device that performs switched data transmission. It is one of the network devices used to establish communication and connection between two or more computers. The switch is combined with a cable attached to the network card to establish communication.

What is an Ethernet Switch?

It is a network switching device that has many ports on the Ethernet switch. It is used to manage the network sharing and security access of devices connected to these ports. It can also be thought of as a kind of port replicator. It is possible to determine how much data it will have access to which port.

DEFAULT ROUTİNG

Default routing is used to send packets to the next-hop router for an unknown remote destination network that is not in the routing table. Default routing should only be used in stub networks, which are the only way out of the network.

As you can see in the above picture, while R1 and R3 can be used defective routing. Because R2 is not effective to use the default routing.
Router(config) #ip route 0.0.0.0 0.0.0.0 10.0.0.1
The above command means to send all unknown packets to output 10.0.0.1, wherever they come from.

Networking in VMware Workstation was the same as before, with the versions. You can create a LAN connection and run multiple virtual machines on VMware Workstation and work on the same network with these machines. We will see step by step how to create a network in VMware Workstation 8.

Now Let’s See How to Create a LAN Connection in VMware Workstation

After creating and managing folders of our virtual machines, click one of the virtual machines we created in the Library pane. Settings and detail information of the machine, properties are shown in the window of the VMware interface as in the picture below,