Network

The easiest way to separate networks is to create a VLAN-based structure. Let’s make a port-based VLAN configuration example on ensp on Huawei switches.

In the buildings A and B, we have computers that belong to different units and let us create a structure where the pcs used by the same unit communicate only to themselves.

for two units

Y: 192.168.100.0/24
Z: 192.168.200.0/24

• Let’s determine the subnet. In the above network structure pc1 pc3 pc2 pc4 pc4 to communicate with each other as the basis of steps
• The PC network configuration should be done in accordance with the specified subnet. and a VLAN for subnets must be activated on the switches vlans should be assigned to the ports where pcs will work
• The link between the two switches should be activated and configured to pass all VLANs.

Let’s configure the PCs ensp after creating the network structure on ensp.

Setting SSTP VPN Client in Windows is more complicated than setting a PPTP VPN Client. This happens because the use of SSTP VPN is much more secure (secure) than PPTP VPN, where the SSTP VPN connection in Windows must use SSL Certificate (Secure Sockets Layer). Another thing with PPTP VPN that does not need to bother using SSL Certificate, just a little setting can already connect.

In this Mikrotik Tutorial, we will discuss Tutorial How to Setting SSTP VPN Client in Windows 10 by first create SSL Certificate from Mikrotik Device. Before proceeding to this Tutorial, make sure you have read the previous Mikrotik Tutorial about:

Introduction

From doing this network management work, it is apparent that Cisco has been adding a little here, a little there, to the SNMP capabilities of the routers and switches. Furthermore, my previous articles on Configuration for Manageability only scratch the surface of the topic. So it seems like it might be useful to us all to take a look at Cisco SNMP features and what they buy us in the way of router/switch manageability. There’s enough to cover that this will be (at least) a two-article series.

Forgot Username and Password Mikrotik? Forgot your Username and Password in Winbox Mikrotik? If the answer is yes, then you are in the right place. Because in this article I will discuss How to know your Username and Password Winbox Mikrotik forgotten it.

There are two conditions which we usually forget the password Mikrotik:

1. Forget your Username and Password Winbox Mikrotik that have not been in the save on Winbox

Cloud Router Switch (CRS) is a high-performance Smart Switch Series device from Mikrotik that has many ethernet ports (up to 24 ports). This CRS device is a Multilayer Switch, which in addition to work on layer 2, can also work on layer 3 switches and unique OS that is used also RouterOS so that all features on RouterOS can also be applied in this device.

Key Features of Cloud Router Switch