Mikrotik devices swell their memory when they work for a certain period of time. This leads to a reduction in the efficiency of Mikrotik devices. This causes the internet speed to decrease or slow down. What can be done to prevent this slowness?
If you select the dashboard > add memory to see the memory occupancy rate in Mikrotik devices, you will see the memory.
Total memory and to see how much is free;
system> Resources
Below I will share the Mikrotik Tutorial to block facebook using Mikrotik L7 Protocol (Layer 7). Layer 7 protocol is a method for finding patterns in ICMP / TCP / UDP streams, or any other term Regular Expression pattern.
How Layer 7 works are to match (matcher) the first 10 packet connections or 2KB first connection and look for patterns/patterns of data matching the available. If this pattern is not found in the available data, the matcher does not check further. And it will be considered unknown connections. You should consider that many connections will significantly increase memory usage on your RB or PC Router. To avoid that add regular firewall match (pattern) to reduce the amount of data sent to the layer-7 filter.
In this article, I will try to explain how to enable the Cisco enable password.
1. Connect the switch to the computer via the console port via a putty or SecureCRT style program.
2. Unplug the switch in power cable.
3. Power on the switch again and hold down the mode button on the left side of the switch as soon as you power the switch. This opens the switch prompt screen.
How to Make Transparent Proxy Mikrotik – Transparent Proxy is a transparent proxy concept that is a proxy configuration where clients are connected to the proxy does not have to setup or enter the proxy configuration to browser one by one. So the use of proxy will be more simple and easy. Before we go there is a good idea you read the article Explanation Web Proxy Mikrotik first yes.
If WCCP protocol is enabled on a router and on an interface, the router looks at a outbound IP packet to see if it is destined for TCP port 80. If so, the packet is redirected to a Cache Engine. For this to work, IP must be configured on the interface connected to the Internet, and on the interface connected to the Cache Engine. The latter must be Ethernet or Fast Ethernet.