Network

When installing a Windows server on oVirt, Inter-Network Interfaces ”,“e1000”and” Disks come as “IDE”. Otherwise, your server will not turn on. This also affects the performance of the machine. Therefore, you should do ”Network Interfaces”, “VirtIO” and “Disks”, “VirtIO-SCSI… Thus, your machine will operate at a smooth performance.

In order to do this configuration, you must install oVirt Guest Agent Driver (oVirt-toolsSetup) after installing the Windows server. You must first download the corresponding version of oVirt-tools-setup.iso (https://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/), mount it as a CD Drive, and then perform the typical * .exe installation… After the installation is finished,

Limiting / Limit Bandwidth on Mikrotik Hotspot is very necessary. Considering Wireless Hotspot can be accessed by anyone who has access rights, so in order to promote justice and prosperity prevalent in all the hotspot user is required Hotspot Mikrotik Bandwidth Limitations.

Bandwidth Limitation Methods Mikrotik Hotspot :

– The built-in limiter is Hotspot Mikrotik Bandwidth Limit method which uses rate-limit parameters in server-profile for limit total traffic on the network hotspot whereas if you want to limit per user can use the rate-limit on user-profile. Built-in Limitation did automatically and easily but do not permit the implementation of HTB.

Tutorial How to Share Wireless Connection in Mikrotik Which Have Only 1 Wireless Interface

At some point, you want to share your internet connection from the wireless interface on your Router Mikrotik Routerboard while your routerboard has only 1 wireless interface. Where your wireless interface is used as a receiver Internet connection (Station) that does not allow you to spread the internet connection through this wireless interface as well. At times like this, you can take advantage of the so-called Vitice Access Point Mikrotik interface (VAP). With this VAP interface, you can add a wireless interface to the master interface that is wlan 1. The later VAP interface is what will spread the internet connection via Wireless as well. Below is a tutorial on how to set …

Explanation of the Use of Wireless Tools Mikrotik – Mikrotik Router has the function and features of Wireless that we can use for communication between devices with Mikrotik using wireless communication media. But not all Mikrotik can use this Wireless feature because of not all types of Mikrotik Wireless Card there.

Here is Mikrotik RB 750 which only have 5 ethernet interface and without the wireless interface, because there is no wireless card. Especially for Outdoor Mikrotik, most can use the Wireless feature because of available Mini PCI slot for the wireless card.

Login

There are many types of DNS records. It may be difficult for beginners to determine which DNS record is required or how it is set up. In this article, you will learn how to check the PTR record and whether it is set for an IP address.

What is PTR recording?

In short, the PTR record is like an inverted version of the A record. A record maps the domain name to an IP address. PTR maps the IP address to a hostname. However, these two records are independent. For example, a record of hostinger.com may point to the IP address 21.21.128.xx, while 23.23.128.xx can be mapped to a completely different hostname.