Network

Let’s see step by step how to install Hotspot Server in MikroTik routers.

1- Winbox application is downloaded on the login page of the MikroTik site.

<https://mikrotik.com/download>

Here, our computer operating system 64 bit or 32 bit whichever we are downloading.

2- Run the Winbox application and enter the IP / MAC information of the Mikrotik device and connect to the interface of the Mikrotik device. If you do not know the IP / MAC information, click the Browse button in the “Connect To:” field to access the desired information.

Monitoring internet traffic on Mikrotik devices is sometimes vital for us.
It can be very important for us to see how much traffic passes through the ports of the router devices or how much traffic it receives.

Now we will see how to do this step by step.

The first step is to select which interface we want to add from Mikrotik Winbox Tools> Graphing> Interface Rules + New Interface Graphing Rule.

Ubnt Airmax Model Comparison

Ubnt Airmax Model In fixed outdoor wireless communication, there are two main distribution methods used for wireless distribution: Point-to-Point (PtP) and Point-to-Point (PtMP). In this article, we will examine the Point-to-Point (PtP) Airmax AC and M series. Ubnt Airmax Model, Point-to-Point (PtP) Usually used to connect two locations with an Ethernet bridge, usually more than one km away. Used for data transfer and image transfer.

Ubnt Airmax Comparison Chart

I hope it has been a useful article.

In this article, Unifi Reset will try to explain how to restore an UniFi Access Point to factory settings in different ways. I will explain the options of UniFi Network Controller software, SSH and physical reset and reset options. This article applies to all UniFi Access Points models and versions; the position of the reset button on each different model may vary. See the specific Quick Start Guide for each product to find it.

UBNT NETWORKS

In this article, we will examine the Unifi Adoption Failed Problem which is a common problem.

I will talk about the access points that are not adapted to the unifi controller (Unifi Adoption Failed Problem) in Ubnt unifi access points that we frequently encounter in corporate networks.

Normally the Ubnt Unifi access point and controller should be automatically adapted if they are on the same network, but in some cases, it doesn’t adapt if you’re on the same network, even though options such as antivirus and firewall are turned off. (I’m still not able to solve some of the reasons that we are able to make Unshift ssh saves us from this situation.) With ssh, we can perform manual adaptation.