Mikrotik

Mikrotik Wifi Error Codes / Descriptions can be reported in detail.

Joining failed: Communication can only take place in station mode. it also failed to connect to the AP for some reason.

Join timeout: This can be a nuisance in Station Mode. Perform when the first flag fails to receive the frame. It may be at a remote point from the connection capacity or a low signal level. Due to the noise at different frequencies, the station connection may not take place.

This article is a continuation of the previous article. In the previous article, we discussed “Mapping paths with Route Rules” so in this article we will discuss [Policy Based Route 2] Mapping Paths with Mangle.

Mangle is one of the features found on the firewall menu. Mangle itself has a function to mark a connection or data packet, which passes through the router, into the router, or exits the router.

Mikrotik is a device that is quite flexible and we can set the configuration according to the needs of the existing network. Many kinds of features are added to the system, such as Firewall, Routing, Bandwidth Management, Web-Proxy, Samba Server, L2 Management, Hotspot, RADIUS functions, etc.

In addition, MikroTik products generally have several ethernet ports which by default each run independently, in other words, we can use it for more than one ISP Line by Loadbalance or Failover methods. Or you can also configure it with bridging mode for L2 Management needs.

In Firewall, some rules may need to be implemented for more than one interface. In such cases, instead of creating a separate firewall rule for each interface, Mikrotik offers us the Interface-List architecture as a solution in both the Firewall and similar fields.

So what does this feature give us?

First, each firewall rule plays an important role in the RAM/CPU relationship. On this side, when you need to write the same rule for 5 different interfaces, a job that can be checked 5 times can be written and controlled at once.

Greetings.

Good night Mikrotikers hopefully you are always healthy, this time we will share tips on how to take advantage of features Mikrotik buzzer as a marker/notice that the Internet connection is monitored down.
these tips are already many shares but there is no harm if we do report back 🙂

what is the mean of a buzzer?
The buzzer is an electronics component that can convert electrical signals into vibrations of sound.