Linux Tutorial

On systems (depending on the project and environment), we often work with local IP's, and we can obtain them from the network settings or through the command line. However, to process real IP's, we can obtain real IP via the router/modem interface or the URL that provides online services (multiple sites are available) and then process. Above is the NCC ripe.net as an example. There is a section above the entrance on the right side that reflects your output rope.

When installing a Windows server on oVirt, Inter-Network Interfaces ”,“e1000”and” Disks come as “IDE”. Otherwise, your server will not turn on. This also affects the performance of the machine. Therefore, you should do ”Network Interfaces”, “VirtIO” and “Disks”, “VirtIO-SCSI… Thus, your machine will operate at a smooth performance.

In order to do this configuration, you must install oVirt Guest Agent Driver (oVirt-toolsSetup) after installing the Windows server. You must first download the corresponding version of oVirt-tools-setup.iso (https://resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/), mount it as a CD Drive, and then perform the typical * .exe installation… After the installation is finished,

VPN stands for  Virtual Private Network. An open-source VPN software is OpenVPN and can run as a Linux VPN server. Simply, a VPN secures connections by creating a point-to-point secure connection. Using a good VPN for Linux is one of the best ways to stay secure on the Internet or an open network. In this article, we will show you how to set up your own Linux VPN server using OpenVPN. Turn your VPS into a great security measure!

Login

There are many types of DNS records. It may be difficult for beginners to determine which DNS record is required or how it is set up. In this article, you will learn how to check the PTR record and whether it is set for an IP address.

What is PTR recording?

In short, the PTR record is like an inverted version of the A record. A record maps the domain name to an IP address. PTR maps the IP address to a hostname. However, these two records are independent. For example, a record of hostinger.com may point to the IP address 21.21.128.xx, while 23.23.128.xx can be mapped to a completely different hostname.

The Linux tar command is one of the most commonly used Linux commands for compression. There are many benefits of using the tar command and are therefore highly appreciated by professionals. In this guide, we will teach you everything you need to know.

Tar stands for Tape archive and is used to compress one or more files and folders.

In most cases, a .tar file is created after compression with the tar command. Further compression is done using gzip, resulting in a .tar.gz file.