IBM servers can be remotely controlled by hardware. In cases where the server needs to be physically restarted, shut down, and turned on, ipmitool commands can be used instead of the Web Console. You can even switch from console to operating system level and make transactions. We will do this by using the IP that we assigned to the server with IPMITOOL IP SET. You must install the ipmitool package on the user side.
We will explain how to connect to your OpenVPN server via Ubuntu in two ways. One is via CLI and the other via GUI. We will use PfSense as the VPN server. In addition to using PfSense as an OpenSource firewall, you can use it for many purposes. We will use the VPN server for the process here and get the configuration files from it.
First, we extract the configuration files from the VPN server. **.Ovpn, \ .p12, * .key. In the meantime, the configuration varies on the server-side. So for ios, for android, for windows and are divided into standard packages.
Simple Network Management Protocol(SNMP) is used to control devices located in large network structures. From the temperature on the device to the users connected to the device, internet connection speed, and system uptime, various information is contained within the panel structure defined in SNMP.
You can review this link before installing.
Run the following command to start the installation. Let’s install SNMP and its tools.
>yum -y install net-snmp net-snmp-utils
You can then use the vi editor to configure SNMP with the following command.
First, let’s list the interfaces and see detailed information about their status. For this;
Run the nmcli d command.
I have 1 interface’ eno and it seems that it is not connected, as the picture below shows,
Then let’s start the process quickly. First, you need to use an editor command for interface settings. I’ll use the vi command in the default, my advice is vi, but you can use different editor commands. Of course, you can use those commands after installing and integrating them.
Apache is one of the most used web services in the world. When hardware is insufficient or fewer resources are required on the server, instead of using any server management panel (cPanel, Plesk, CWP, etc.), only the services to be used can be installed on the server and high performance can be obtained from the server.
In this article, we will explain step by step how to install Apache web service to Centos 7 operating system.