Ccnp

Cisco Standard Break Key Combinations

Ccna, Ccnp, Cisco, Network
Fadıl

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

SoftwarePlatformOperating SystemTry This
HyperterminalIBM CompatibleWindows XPCtrl-Break
HyperterminalIBM CompatibleWindows 2000Ctrl-Break
HyperterminalIBM CompatibleWindows 98Ctrl-Break
Hyperterminal (version 595160)IBM CompatibleWindows 95Ctrl-F6-Break
KermitSun WorkstationUNIXCtrl-\l
Ctrl-\b
MicroPhone ProIBM CompatibleWindowsCtrl-Break
MinicomIBM CompatibleLinuxCtrl-a f
ProComm PlusIBM CompatibleDOS or WindowsAlt-b
SecureCRTIBM CompatibleWindowsCtrl-Break
TelixIBM CompatibleDOSCtrl-End
TelnetN/AN/ACtrl-], then type send brk
Telnet to CiscoIBM CompatibleN/ACtrl-]
TeratermIBM CompatibleWindowsAlt-b
TerminalIBM CompatibleWindowsBreak
Ctrl-Break
TipSun WorkstationUNIXCtrl-], then Break or Ctrl-c
~#
VT 100 EmulationData GeneralN/AF16
Windows NTIBM CompatibleWindowsBreak-F5
Shift-F5
Shift-6 Shift-4 Shift-b (^$B)
Z-TERMINALMacAppleCommand-b
N/ABreak-Out BoxN/AConnect pin 2 (X- mit) to +V for half a second
Cisco to aux portN/AControl-Shift-6, then b
IBM CompatibleN/ACtrl-Break

I hope it has been a useful article.

Routing Technologies-Protocol Version 1 (RIPv1) and Version 2 (RIPv2)

Ccna, Ccnp, Cisco, Network
Fadıl

RIPv1 is a Distance-Vector Routing protocol

• RIPv1 is a Classful routing protocol. Classful routing protocols bolster just the systems which are not subnetted. Classful routing protocols don’t send subnet veil data with their routing updates. As it were, on the off chance that you have a subnetted arrange in your RIPv1 directing area, RIPv1 will declare that network to different as un subnetted organize.

RIPv1 does not support VLSM (Variable Length Subnet Masking)

• RIPv1 bolster greatest metric (jump tally) estimation of 15. Any switch more remote than 15 jumps away is considered as inaccessible.