Fadıl

We may want to back up the configuration of our Mikrotik device to the FTP server at regular intervals, we would like to show you a short and beautiful script that we can use for this.
You can run this script system schedule according to a time that we will determine and save your configuration backup on your FTP server according to the following parameters. By doing this periodically, we will ensure that we receive regular backup.

Connecting the TP-Link device to your computer

Connect the devices as shown in the figure below.

A. Connect the CPE’s LAN0 port to the PoE port of the PoE adapter.

B. Connect the computer to the LAN port of the PoE adapter.

C. Plug the PoE adapter into the power socket.

In order to connect to the Tp-Link Cpe610 device, we first need to give the IP address of our computer’s ether port as 192.168.0.10.

There are various media used to hold meetings or video conferences, one of which is the most widely used Zoom Meeting. In this article, we will try to optimize the network by prioritizing the connection used by video conferencing so that it can be used properly without any interference. The bandwidth used will be prioritized so as not to be disturbed when other clients browse the internet.

Previously, we tried to find all the information about the Zoom application, both from the IP server, protocol, and port used. Information to the official Zoom website, the Zoom application uses TCP and UDP protocols with ports 80, 443, 3478, 3479, 5090, 5091, 8801-8810. These protocols and ports that we will use to capture traffic to the Zoom server. Apart from protocol and port, it can also be based on the Zoom server IP which we will add to the router.

The reason for this problem is that the database is probably corrupted on your server with UNMS installed, so you are getting this warning.
Even though the solution is different in many forums, you don’t need to spend a lot of time installing and repairing redis-tools.

The following database repair commands are included for UNMS 1.2.0 and above.
A little bit of Linux knowledge will be enough to solve this job with a little bit of ssh and putty.

It has the same working logic as Doh DNS, that is, the Domain Name that a client device wants to go to is resolved and the request it sends turns into an IP address in the background, the difference of Doh is that it encrypts these requests.

If D.O.H is not used, even if a request is sent to a site using HTTPS, this request is kept as non-encrypted text in the background, and therefore D.N.S requests from client devices may be viewed by ISP or by an unauthorized person.