Fadıl

How to Make Transparent Proxy Mikrotik – Transparent Proxy is a transparent proxy concept that is a proxy configuration where clients are connected to the proxy does not have to setup or enter the proxy configuration to browser one by one. So the use of proxy will be more simple and easy. Before we go there is a good idea you read the article Explanation Web Proxy Mikrotik first yes.

Today, we will set up a proxy for the Zabbix server that I have installed in version 3.4 and enable it to communicate.

First things you need to do;

1- IP configuration

2- Turning off selinux and firewall settings

3-C hange hostname (optional, easy to manage large structures)

4- Passing updates.

If the server is ready after the steps mentioned above;

We enter the Zabbix official repo and download the required rpm package.

Web Redirection and Design Tips

If WCCP protocol is enabled on a router and on an interface, the router looks at a outbound IP packet to see if it is destined for TCP port 80. If so, the packet is redirected to a Cache Engine. For this to work, IP must be configured on the interface connected to the Internet, and on the interface connected to the Cache Engine. The latter must be Ethernet or Fast Ethernet.

If you have forgotten the router’s enable secret password or someone has just given you a second-hand router, and you don’t know it, you need to decrypt it to configure it.

The first thing we need to do is to make sure that the IOS (operating system) is not loaded when the router is turned on, so press the CTRL + BREAK  keys for 60 seconds during boot. With this process, our device is opened with the operating system where mini IOS operations can be performed. ROMMON mode. (ROMMON mode is like a small operating system.)

In this article, I will be talking about the concept of IP and Subnetting.

Now let’s take a little technical approach;

Each system on the network that communicates must have an IP address. IP addressing is used according to the routing layer (layer 3) of the TCP / IP protocol cluster.

IPv4 – IP (Internet Protocol) Addresses

IP addresses (in IPv4) are 32-bit numbers. These numbers are divided into four 8-bit segments for ease of writing and display, as well as the ease of network management. I’m going to call each of these parts Octet later in my article.