Fadıl

KVM Kernel-based virtual machine is a virtualization application developed for the Linux kernel that converts it to a higher system.

Before installation, login to our server to see if it supports CPU, let’s check the CPU information with the help of the following commands.

The output of this command means  “CPU(s):” 0 does not support if it is 0, and if it is more than 1 or 1, it means it supports.

Follow the signal levels in the Mikrotik AP to which our customers are connected.
in such cases, we can check the signal level and send information SMS to us via telegram.

For this process, we can define the following code as a 3-5 minute task to the scheduler.

You can reach our article about creating telebotID and TeleChatID from the link below.

http://techsoftcenter.com/how-to-create-a-telegram-bot-id-chat-id/ for telebotID and TeleChatID.

:local TELEBOTID xxxxxx
:local  TELECHATID xxxxxx
:local level -65;
:local sub1 ([/system identity get name]);
:local signal;
:local radio;
:foreach i in=[ /int wir reg find] do={ 
  :set signal [int wir reg get $i signal-strength];
  :set signal [ :pick $signal 0 [:find $signal "dBm"]]
  :set radio [/interface wireless registration-table get $i radio-name]
  :if ($signal < $seviye) do={
      /tool fetch url="https://api.telegram.org/$TELEBOTID/sendMessage\?chat_id=$TELECHATID&text=$sub1 $ radio subscriber signal is broken. Signal value $ signal "
  }
}

Keeping the name of your Mikrotik device in / system identity section will keep the device’s name information coming to you correctly.

If the port level (10Mbps / 100Mbps 1G or 10G) of the devices connected to the ports of your Switch or Router changes in any way, you may need an application to monitor this situation. A simple application was developed with a telegram on this side. It checks the status of the Ethernet and sends you a telegram message if it has a value other than the one you specified.

If DNS Recursion is turned on, you are exposed to the “DNS Amplification Attack”  attacks. This attack is also known as a DNS-powered DDOS attack. For this reason, DNS Recursion should be turned off and we will see how to do this. Assuming you are more or less familiar with the consequences of a DDOS attack, what is DNS Amplification Attack? I leave here a beautiful video explaining the situation without drowning in too much detail.

When the IP information changes in wan interfaces (DSL, Local, any DHCP or VPN client) in Mikrotik, we can use telegram application to ensure that this information can be reached by SMS.
This example has been prepared with telegram since Telegram has become a popular application in the near future. If you change the relevant URL after the “/tool fetch ” the command to SMS API URL, the information will be sent to you as SMS.